Demand communication table of mast

Demand communication table of mast

Dear customer, in order to give you the best technical solution, the optimal configuration and offer the most efficient service, please fill out the following information.

  Customer contact

1 Relevant technical information

1.1 Load device

1.1.1Load device mounted on the mast：          

1.1.2 Weight of the Load device：        kg

1.1.3 Frontal area of the Load device：       ×      c㎡  If some part is hollow, then the vacuum ratio        

1.1.4 Whether the load equipment installation geometric center of gravity is eccentric or not? If yes, eccentricity is      cm

1.1.5 Please provide the load equipment installation requirements in the lift rod

1.2 Requirements about the mast

1.2.1 Extended height of the mast：        m

1.2.2 Retracted height of the mast：        m

1.2.3 Deadweight of the mast：no more than         kg

1.2.4 Whether need guying rope or not：  □Yes     □No

1.2.5 Time for one way operation：        min

1.2.6 Max. wind speed when the mast work with load：         Level or            m/s

1.2.7 Dynamic requirements under the steady wind speed：□Yes □No，

If yes, please state：        cm，offset：       °

1.2.8 Survival wind speed of the mast：        Level or            m/s

1.2.9 Mast installation mode：□install on the ground   □install in the vehicle   □install out of the vehicle    

1.2.10 Power requirements about the mast：□Electric    □Manual     □Hydraulic

If electric, then：Voltage：       V     □AC    □DC：

1.2.11 Working environment of the mast：           ℃  

1.3 Demand quantity：      set

1.4 Expected cycle：      days

2 Other special requirements：